|
| |
|
Cable and Cable Accessories |
|
Many systems are let down by inferior quality cables. Ocean TV
technicians have seen systems installed where the connectors have
come off the end of cables, cheap low quality AV or HDMI Cables
giving fuzzy pictures, or installations where cheap composite video
cables have been used.
Because of our buying power, often our cables are the same as the
high end Hi Fi stores but at less than half the price. You can be
assured a Ocean TV Satellite System will be second to none, and
will only use very the very best cables, splitters, switches and IR
Systems.
Always ask you dealer or installer to supply Ocean TV Certified
Accessories. This mean each of these accessories has been tested to
work with Ocean TV Antennas, and meet Ocean TV stringent standards.
Demand
The Best - Ocean TV Certified
|
OceanHDMI Cables
OCEAN TV Flat Cables 
Ocean TV HDMI
Flat cable is designed exclusively for high quality marine market
with space saving installation. Its flexible
flat cable form means that you can manipulate it into all kinds of
positions, under the carpet, around corners, inside walls and behind the
entertainment system with ease. The flat design of the cables
renders them unobtrusive.
Ocean TV HDMI
Flat cable are designed for high quality system, sit back
and just enjoy the experience of crystal clear HD Television
and Audio.
Product
Specification :
-
Transfer
Rate:4.95Gbps, 10.2Gbps , High Speed W/Ethernet, Supports
Resolution up to 4000x2000
-
Cable Type: Triple Shielding
- Signal Type:
Transition Minimized Differential / Signalling (TMDS)
- Connector Type:24K Hard Gold Plated
- Outer
housing: Zinc Alloy With better EMI
-
Conductor: 99.999% Oxygen Free Copper
-
Cable
Connections: HDMI Type A Male to HDMI Type A Male
Available in Cable
lengths of 1m, 2m, 3m, 5m and 10m
|

|
OCEAN TV Signal Booster
Cables 
Often, an installation
in a vessel can have long cable runs. HDMI has a theoretical limit
of just 5m, but Ocean TV has a solution for this. The Ocean TV HDMI
with a Signal Booster built into the cable itself.
Available in
lengths of 10m, 15m, 20m and 30m it is the answer to the HDMI 5m
limit.
1.
Data transfer rate up to 10.2 Gb/s.
2. Supports Dolby® TrueHD and DTS-HD
Master Audio™.
3. HDCP compliant.
4. Audio Return Channel – Allows an
HDMI-connected TV with a built-in tuner to send audio data
"upstream" to a surround audio system, eliminating the need for a
separate audio cable.
5. Support 3D – Defines input/output
protocols for major 3D video formats, paving the way for true 3D
gaming and 3D home theater applications.
6.
Support 4K resolution – Enables video resolutions far beyond 1080p,
supporting next-generation displays that will rival the Digital
Cinema systems used in many commercial movie theatres.
|

|
|
OCEAN
TV Fibre Optic Hybrid HDMI Cable 
The Ocean TV Fibre Optic HDMI Cable
is a revolutionary HDMI Cable which combines HDMI and fibre optic
technologies.
The result is a highly flexible and
extremely durable cable with the ability to deliver high quality
HDMI signals up to 150M long without employing any boosters. The
display quality is simply unbeatable. It is the perfect choice for
superyachts, particularly when the required distance is over 40M.
1.Consisting of optical fibers and
copper wires
2.Maximum data rate 3.4Gbps
3.Supports 3D TV with aggregate
bandwidth 10.2Gbps
4.Long-term minimum bending radius
52mm
5.Longer, thinner cable without EMI/RFI
emissions
6.Plug and play
7.Low power consumption (Max. 250mW)
Available in Cable Lengths of 20m, 30m, 40m, 50m, 60m,80m and 100m |

|
Satellite RG6 Coxial Cables
OCEAN TV Antenna Cables 
All Ocean TV
Antenna Cables are custom made in house my Ocean TV. This cable is
the most important cable in the Satellite Antenna System, it carries
the Power and Data to and from the Antenna. Inferior cables can
suffer from voltage and signal drop, resulting in a smaller region
area the Antenna can actually work in.
Only the best cable
is used to deliver the very best satellite reception and
resolution. Poor quality cabling often have connectors that fall
off or become loose.
All cables use
compression F-Type Connectors at each end are designed for RG6 Quad
Shielded Cable, not cheap crimped on connectors.. The connectors are
waterproof, with dual crimp points for the cable and Dual O-Rings
for the thread. The Connectors are Foxtel approved.
The RG6 cable used is the Quality U.S
made Belden brand, as used by all Pay-TV installers. It features a
solid 18AWG steel centre conductor, copper plated, gas injected
polyethylene foam insulation (to keep water out), Black P.V.C
jacket, plus 4 layers of screening: a combination of aluminium foils
and braiding. 100% sweep tested 5MHz- 1GHz.
Available in Cable Lengths of 1m,
5m, 10m, 15m and 20m. Plus we can have custom made lengths. |


|
HDMI Splitters - Converters - Digital Matrix Switches
HDMI Splitters 
Many installs require a HDMI Signal
to be split to several TV's on board. This is often done when there
is one Pay TV Satellite Receiver, but it is displayed on several
TV's at the same time. Satellite TV 4 Boats have a number of HDMI
Splitters that also boost the HDMI signal to achieve this,
One HDMI Cable comes into the Splitters, the signal is boosted, and
then split into 2,4,6, or 8 HDMI outputs.
HDMI Converters 
Certain Pay TV Satellite Receivers
do not offer a HDMI output, only the older AV outputs via SCART..
Satellite TV 4 Boats has a special SCART/AV to HDMI Converter that
also scales resolution up to HD 1080p.
This then allows the use of of
HDMI Splitters, Digital Matrix Switches and the very latest HD
Televisions. Old Standard Resolution SCART is Input, and High
Definition Resolution HDMI is Output. Also the Audio is separated
if required for input into a surround sound system.
HDMI Digital Matrix Switches 
These switches allow up to four
inputs, Pay TV, VAST FTA, DVD/Blue ray and Media HHD, to be output
to 2 or 4 outputs. Each output can have any of the four inputs
displayed, or a signal input can be displayed on all TV's at the
same time.
Often used on larger vessels with
4 Televisions. Each input can be switched by a master remote
control to any TV, allowing each input to be shared. |

 

|
|
IR Extensions
Signal Room 
IR Extensions allow Satellite
Receivers, Digital Matrix Switches, DVD Players etc, to be hidden
away from view, in a cupboard for example, and yet still be
controlled via a standard IR Remote Control (IR- Infra Red).
This is important in a boat, as it
allows a very clean looking install, with all cables boxes etc
concealed, and also allows everything to be installed in a dry
location. Satellite TV 4 Boats uses only Foxtel approved IR
Extensions, as cheaper brands often do not work on IQ Style
Satellite Receivers. Up to four individual devices can be
controlled by the one IR extension. A small IR emitter is placed on
each component, and then a IR Receiver is placed near the Television
to receiver the IR Remotes commands.
Multi - Room IR Extensions 
Similar to the above Single Room
System, a multi room model is available that allows remote controls
to work at each Television location, controlling each device
independently. |

|
|
All Ocean TV accessories are 100% certified for use with Ocean TV
Antennas, and carry full Australian Warranties
We recommend to only use Ocean TV Accessories to avoid problems with
inferior products
|
|